Threaded View
-
18-01-2014 #11
Last Activity: 19-12-2024
Dean how thich aluminium plate do you suggest?
Is 20mm ok or i could go on with 15mm
Firstly i was planning to have all the gantry welded BUT the front plate ( green color at the above photos ) would be 15mm aluminium true leveled.
Also ( as the y axis rails would be at the same plane) i would use two plates to attach the gantry to the carriages . They would be connected each other with bolts ( one bolted on the carriages and the other welded one on the gantrys sides ) so i could adjust the vertical position of the spindle. I will make a plan and i will come backLast edited by ba99297; 14-02-2014 at 11:21 AM.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: New build.Stell frame cnc 1500X1000.Ball screw and gearing calculations
By ba99297 in forum DIY Router Build LogsReplies: 12Last Post: 03-09-2013, 10:37 PM -
Adjustable spindle mount?
By cncJim in forum Marketplace DiscussionReplies: 2Last Post: 19-06-2013, 08:58 PM -
Your Opinion
By PWD in forum Milling Machines, Builds & ConversionsReplies: 4Last Post: 22-05-2012, 11:02 AM -
Opinion about the structure of the router ...
By C.AlveSilva in forum Gantry/Router Machines & BuildingReplies: 11Last Post: 01-05-2012, 02:03 PM -
WANTED: adjustable tailstock
By johngoodrich in forum Items WantedReplies: 0Last Post: 29-03-2012, 07:38 PM
Bookmarks