Stell frame cnc 1500X1000. Adjustable table your opinion please

[ba99297]

Hello everybody
I am happy that i restart my project
Many things had happened during the last year, that make me stop any kind of progress
That until August when i decide to restart, but first i had to make some changes in my working place
The most important was that the floor was worn and all these years was a source of dust.
That was the situation before


I decided that i must lay tiles and keep one place with some kind of heavy duty concrete, in order to be able to weld, as tiles even if they are very hard though they are not suitable for such jobs
First i had to clear the floor from old paint
Two days of water blasting with my karcher finally make possible this


Then i begun to lay tiles

It was the first time for me that i lay tiles in such a big scale ( 80 m2), and i lay them diagonally
Finally the result is this



I had the chance to paint. I decide to paint with oil paint the first one meter and the rest with water color

Then i had to make the "baby room". Yes thats right!!!! the place that i will put the cnc. I had some old aluminum doors and i dont want to sell them for scrap. I also had some drop ceiling parts, so i use them all and i made this

Yesterday i move the frame and all the components in order to restart building


As you can see the machine is rolling on 4 wheels. That makes the removal of the machine very easy
Finally the "baby" get in the new house

So Today i start working again on the machine.
Nice feeling
First i had to cut some ruber parts for the adjustable feets


So far that is my progress
I will continue tomorrow
Thanks for your time
Vagelis