. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 17-10-2013 #17
    EddyCurrent's Avatar
    Lives in UK, United Kingdom.
    EddyCurrent
    Last Activity: 29-06-2025 Forum Superstar, has done so much to help others, they deserve a medal. Has a total post count of 2,203. Received thanks 278 times, giving thanks to others 110 times. Is a beta tester for Machinists Network features.
    Having read you previous posts I am surprised you say this
    As I said before the PIC is powered from a plug-in 9VDC power supply, which is connected to the same 230VAC source as the 68VDC PSU which powers the motor / driver.
    because it doesn't matter about that, it's the output dc grounds that have to be connected.
    Last edited by EddyCurrent; 17-10-2013 at 01:55 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. My turn for help with Pulse multiplier for test rig.
    By JAZZCNC in forum Electronic Project Building
    Replies: 75
    Last Post: 20-06-2014, 06:09 PM
  2. MPG or Hand Wheel Pulse Encoder where to buy in UK?
    By suesi34e in forum Marketplace Discussion
    Replies: 5
    Last Post: 02-01-2014, 04:41 PM
  3. Pulse rate or dip switch settings
    By Jopo in forum Stepper & Servo Motors
    Replies: 0
    Last Post: 29-04-2013, 08:08 AM
  4. Strange problem, possibly missing steps?
    By Philly in forum Chinese Machines
    Replies: 5
    Last Post: 26-10-2012, 06:36 PM
  5. Missing Steps + Stalling X-axis
    By danielbriggs in forum Linear & Rotary Motion
    Replies: 5
    Last Post: 02-09-2010, 02:59 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules