Quote Originally Posted by Tenson View Post
then sticking the acrylic sheet on there with lots of double sided tape. I keep the protective cover in place on both sides of the acrylic too. I thought that would be far too weak to hold, but it isn't and it's far easier than removing the double sided tape from the acrylic sheet itself.
Double sided tape is invaluable for thin material, like PCBs. If you're having trouble removing it then I found that WD-40 takes tape off PCB material (SRPB or FR4) very easily, so that might be worth a go assuming it doesn't do anything nasty to the acrylic.