. .
  1. #1
    Hi all.

    Does anyone have the minimum requirements for a PC to run FreeCad and Cambam.
    I intend to run my CNC mill with it's own dedicated PC which has the main requirements for Mach 3.

    I intend to create CAD & CAM in the comfort of my office, in my home, then transfer all the files i need to the Mill PC in the garage, but i am struggling to find the minimum requirements, can anyone help ?



  2. #2
    Ray i had both running no problem on my last laptop which was a 1.9 celeron and only 1 gb of ram (on Ubuntu 12.04). As with most hi screen rendering apps just make sure you have the best graphics and as much ram your pocket can aford or the machine can take?
    Last edited by Swarfing; 26-10-2013 at 12:12 AM.
    If the nagging gets really bad......Get a bigger shed:naughty:

  3. The Following User Says Thank You to Swarfing For This Useful Post:

  4. #3
    I wouldn't look less than a dual core PC, win7 and less than 2gb ram + 1gb ram graphic card, preferably ATI. 80-100eur here in Spain, second hand. With this you will have 0 problems.

    Though It would run on slower machine, the more complicated your models become, the slower it would go.

  5. The Following User Says Thank You to Boyan Silyavski For This Useful Post:

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. MACH 3 requirements
    By manofgresley in forum Artsoft Mach (3 & 4)
    Replies: 14
    Last Post: 08-01-2020, 07:22 PM
  2. Minimum thread engagement
    By JoeHarris in forum Metalwork Discussion
    Replies: 3
    Last Post: 18-08-2013, 12:35 AM
  3. Stepper Driver requirements?
    By Dwayne Dibbley in forum Motor Drivers & Controllers
    Replies: 3
    Last Post: 24-07-2013, 05:29 PM
  4. Requirements on a break out board?
    By Sodster68 in forum Motor Drivers & Controllers
    Replies: 3
    Last Post: 21-01-2013, 02:58 PM
  5. minimum tool & skill set
    By SirMorris in forum Tool & Tooling Technology
    Replies: 7
    Last Post: 11-09-2007, 09:13 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts