Laaser Diode Engraving with PicEngrave Pro 4

[JJWMACHINECO]

Here is some information on the setup. http://www.picengrave.com/Laser%20Setups.pdf

If you want to read how it all started from the beginning and follow how it progressed to what we are doing now, there is allot of information in these threads. These forum posts is how most everything is documented. I even have to go back to them at times for reference.


Vectric Forum • View topic - Can PhotoVcarve be used to Laser engrave on a CNC Router????


Vectric Forum • View topic - Not Just Another Laser Engraving with PVC


Diode Lasers. - Oldal 3 - Fórum


PicDither - PicEngrave - PicLaser. - Fórum


Jeff

[JJWMACHINECO]

Happy Holidays

[andy_con]

what are you engraving, wood or steel?

[JJWMACHINECO]

On wood with a laser diode.

[andy_con]

a 445nm laser is pretty good for burning/marking wood.

you can get single mode 445 diodes which have a better beam but are lower powered or high powered diodes but they are multi modal and don't have good beams. you would need to do some testing to determine which diodes and lens combination give the best results.

google dtr lasers he sells diodes and lens

[JJWMACHINECO]

a 445nm laser is pretty good for burning/marking wood.

you can get single mode 445 diodes which have a better beam but are lower powered or high powered diodes but they are multi modal and don't have good beams. you would need to do some testing to determine which diodes and lens combination give the best results.

google dtr lasers he sells diodes and lens

I guess you did not realize we are the experts in this field. Go to our web site and check it out. https://picengrave.com

[andy_con]

your on photonlexicon forum and so am I ;-)