-
28-10-2013 #1
Hiya every one,
I'm hoping someone can help me.
I'm new to cnc and learning.
Managed to draw a part finally and am looking to get it into gcode for mach3 but lazycam is suitable.
Here is my 3d part.
Simple File Sharing and Storage.
Could someone tell me if it works and what program it will convert to gcode in.
Many thanks.
Becky
-
28-10-2013 #2
I failed to open the file
-
28-10-2013 #3
Did you select download?
-
It openend for me and it seems to say it is a track plate.dxf file but it only opens with line number and text.
you can post a dxf file on the forum. Clive
-
28-10-2013 #5
Yep, it's a track plate, when you click on the link above it will open it in browser. Along the top it will have down load. Click this and it will download the file which will open in a dxf software
-
-
28-10-2013 #7
Yes it is, I'll make sure what version I saved it as. I am using 2013
-
28-10-2013 #8
track plate 2004
this was saved as a 2004 version
-
I have opened it now but if you are learning cnc I think you will find that that part will be difficult to machine and I am sorry but is beyond me at this time. I think you will need a Cam program to convert it to gcode. But I am sure somebody will step in and help out. Good luck. ..Clive
-
28-10-2013 #10
Ok, thank you for trying.
Good thing is that I am gaining control of cad software.
Just need a cam program that will deal with 3d parts
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
solidworks, solidcam, mach3 how to output gcode in solid cam
By jcb121 in forum SolidworksReplies: 1Last Post: 20-10-2012, 02:50 PM -
Mach3 Using a physical button to repeat current gcode
By RLKS Rob in forum Artsoft Mach (3 & 4)Replies: 2Last Post: 12-08-2012, 01:30 PM -
gcode stops mid way can anyone test..
By crossleymarko in forum CAD & CAM SoftwareReplies: 16Last Post: 22-04-2012, 12:45 AM -
Tapping Gcode
By Kai in forum General DiscussionReplies: 10Last Post: 14-12-2010, 07:07 PM -
PLease help - gcode newbie
By scotty in forum Programmers CornerReplies: 3Last Post: 07-03-2010, 12:48 PM
Bookmarks