Quote Originally Posted by idefix View Post
Hi Neale,
I'm happy to share related information back with you.
I have broken the design so that you can see the area as detailled as possible. Let me know if this is what you are looking for.
As a comment note that for the Z axis my rails are type HGR15 with Hiwin HGW15CA blocks and the screw is a 1605.

Distance from Gantry plate to Z plate (plane supporting the blocks) is 24mm
I wouldn't use those spacer plates and just buy thicker Material because your introducing several more operations into the job but more importantly increasing the chance for error.!! . . . . Unless Your getting the work done for free won't be saving any money and will probably be cheaper because of less cycle time involved, also it won't be much lighter.