Thread: Confident Creative designer
-
02-11-2013 #1
Hi guys,
Bit off topic with this one maybe but im looking for someone who has a very open mind that can design me an access ramp. Sound easy...?
Here is the snag!
The ramp is to be designed for access into a swimming pool for dogs!
Anyone interested in this project that has good skills with solidworks or any high end software give me a shout.
-
02-11-2013 #2
Would think It's a lift or a hoist you need not a ramp has even with Anti slip material would think they could slip on a ramp. It would need a long ramp to be safe.
Crane with lowering platform would work good IMO. (Like the platforms RAF hang under helicopters.!!)
-
02-11-2013 #3
I agree Jazz but my customer needs a ramp to comply with regulations of a hydrotherapy pool.
What I was thinking is something similar to pool steps. Nice chrome framework with stainless floor an ramp. With the same anti slip material on pool steps.
The ramp would have to start from one corner, go the width of the pool and then to the centre of the pool along the side. All on a general slope to aid stress of a disabled dog.
-
02-11-2013 #4
If it needs to be a ramp to comply with regulations then there may already be something laid down governing it's design, manufacture & installation. A wheelchair ramp has a minimum 1 in 12 slope so there may be some figure covering this. Does it need to be wide enough for just the animal or a handler as well? Is there a minimum weight loading of any kind.
Once you have designed it is there anyone who you can run it by to make sure it is suitable before you go to the expense of manufacturing & installing it.
-
03-11-2013 #5
Thanks Martin.
All that it says (according to the customer) is that there is to be a ramp in place incase the canine panics. Or for the canine to be able to exit the pool unaided.
-
03-11-2013 #6
Nice little sum for the person who could help me with this.
Sorry Martin, width is that of a canine not a human. I know regulations state for health and safety reasons for a human is 1mtr however. The human enters the pool via steps adjacent to the ramp.Last edited by D-man; 03-11-2013 at 12:56 AM.
-
03-11-2013 #7
-
03-11-2013 #8
No the pool is a deck level pool. So it nobly requires the ramp inside the pool.
The pool is square. I will post some pictures when I get to a PC
-
03-11-2013 #9
Don't bother with a ramp, just throw a fooking biscuit in the pool.
Works every time.John S -
-
03-11-2013 #10
Trouble is I would beat the dog in the pool for a biscuit lol
Thread Information
Users Browsing this Thread
There are currently 21 users browsing this thread. (0 members and 21 guests)
Similar Threads
-
NEW MEMBER: Im new, am a 3D designer. Need a New cnc machine and need advice and guidance
By FlyHighRC in forum New Member IntroductionsReplies: 134Last Post: 10-06-2014, 12:28 AM -
NEW MEMBER: Cornish Designer with ISEL CNC machines (x3)
By badgerman in forum New Member IntroductionsReplies: 5Last Post: 26-09-2013, 12:22 AM -
NEW MEMBER: Designer with a plan looking for advice
By bigstu67 in forum New Member IntroductionsReplies: 2Last Post: 10-10-2012, 06:04 PM -
NEW MEMBER: new designer on the block
By lugtigheid in forum New Member IntroductionsReplies: 2Last Post: 29-12-2010, 08:56 PM -
Newbie designer
By Conan257 in forum Computer SoftwareReplies: 6Last Post: 20-04-2009, 08:59 PM
Bookmarks