-
17-11-2013 #1
Hi Guys,
I have a lovely little Denford Triac VMC with atc. I think I should have VR milling software version 2.31 but am thinking of trying to get the machine to a point where it could use Mach 3.
My question to anybody that knows about such matters is is the upgrade to Mach 3 worth a lot of time hassle and money? If so some pointers as to why may help me make the right decision.
Further info
If anyone knows how to upgrade my machine or has done so using off the shelf or custom parts any help would be great. I would pay for the right help and am on the south coast if there is someone local that would like a project to help with.
I have little knowledge but believe the Mach 3 need more I/O ports to interface correctly
Many thanks for any help that anyone can offer.
Best regards
sue
-
17-11-2013 #2
sue,
Have you seen this thread ?
http://www.mycncuk.com/forums/mill-b...onversion.htmlLast edited by EddyCurrent; 17-11-2013 at 11:44 PM.
-
The Following User Says Thank You to EddyCurrent For This Useful Post:
-
18-11-2013 #3
Yes Eddy thank you very much but had read this one. I had better not strip mine down in my bedroom or I would be for the high jump!
Many thanks
sue
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
A good price?
By Philly in forum Marketplace DiscussionReplies: 7Last Post: 17-04-2013, 11:03 PM -
NEW MEMBER: Good aft one and all...
By Swarf in forum New Member IntroductionsReplies: 1Last Post: 22-04-2012, 07:03 PM -
NEW MEMBER: Good day all!
By icedfusion in forum New Member IntroductionsReplies: 0Last Post: 07-10-2011, 08:38 PM -
is this kit any good
By deannos in forum General ElectronicsReplies: 6Last Post: 26-03-2011, 09:17 AM -
NEW MEMBER: Good Day All
By Mad Professor in forum New Member IntroductionsReplies: 3Last Post: 07-06-2009, 10:13 AM
Bookmarks