Thread: Stepper motor help
Threaded View
-
03-04-2009 #1
As a complete numpty to this CNC building I need a question answered.
I have decided to build a Rockliffe Flying gantry machine. 48" x 36".
Now the construction side is not to much of a problem but the motor and electronics of the build are completely over my head. I have spent many hours researching this build but to be honest the specs of these things are above me. I have found this on fleabay and was wondering if this is what I should go for.
It won't be doing any heavy machining just profiling composite aluminium laminates mostly 3mm thick. (easily cut with a standard router)
http://cgi.ebay.co.uk/ws/eBayISAPI.d...2BSI%26otn%3D3
I know I will need 4 axis and from what I have read I think this kit should fit the bill. Can anyone tell me if this is right for what I need and is the price good or bad.
Looking forward to your replies.
Cheers
Mike
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Stepper Motor Driver - cheap similar to ArcEuro 4.2A Bi-Polar Stepper Motor Driver
By craynerd in forum Motor Drivers & ControllersReplies: 1Last Post: 16-03-2014, 07:29 PM -
Stepper motor as a generator??
By wiatroda in forum General DiscussionReplies: 10Last Post: 08-08-2011, 10:17 PM -
Stepper motor wiring
By Buba b in forum Stepper & Servo MotorsReplies: 5Last Post: 28-03-2010, 06:16 PM -
Stepper motor help.
By Kammo1 in forum Stepper & Servo MotorsReplies: 4Last Post: 12-02-2010, 11:11 AM -
Stepper Motor Driver v2.3 2A $20 !!!
By Lee Roberts in forum Motor Drivers & ControllersReplies: 15Last Post: 17-05-2009, 10:57 PM
Bookmarks