Thread: Limit and Home Switch Choice
Threaded View
-
28-11-2013 #8
I'm doing a mill conversion and will be using 2 N.C. micro switches per axis. They will be mounted in the same position in piggy-back style. The first switch is in series with the e-stops and kills the mains supply, the second one is the homing switch. They will be activated by staggered cams so that the home switch is activated approx 2mm before the e-stop.
Last edited by birchy; 28-11-2013 at 10:01 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
EMC2 home/limit switches... only acting as limit?
By vputz in forum LinuxCNC (EMC)Replies: 4Last Post: 15-10-2014, 09:51 AM -
Another Home - Limit switch question
By Cube3 in forum General ElectronicsReplies: 6Last Post: 26-12-2013, 07:51 PM -
FOR SALE: Z axis with Home/limit switch and Nema 23 3nm
By Shinobiwan in forum Items For SaleReplies: 6Last Post: 02-02-2013, 10:54 AM -
Limit switch Cable ...
By Wobblybootie in forum General ElectronicsReplies: 3Last Post: 17-01-2011, 04:37 PM -
Limit switch's - best configuration?
By HiltonSteve in forum General ElectronicsReplies: 16Last Post: 13-08-2009, 01:26 PM
Bookmarks