New spindle needing new mounts

[JAZZCNC]

Hardwood.
16 inches per minute (machine max)
1/8in pass depth
Step over of 40%

I increased if there to 90% step over and 1/4 pass depth and dropped it to about 5 hours

Ok well the Low feed is the killer but even then with your 1/8 DOC and 16" feed & 40%STO it still comes out at 6hr 7mins in SolidCam and thats with Spiral down Entry. 5hrs 27min with 45%STO.

With 90%STO 2hrs 48min.