Threaded View
-
07-12-2013 #1
Hi,
I'm looking to buy a small milling machine or router at some point next year for cutting small parts (up to 180x180mm) from aluminium (up to 6mm thick). My requirements are that it must be fairly small and fully enclosed (although I could build an enclosure myself if needs be) as it is going into an electronics assembly/test environment rather than a machine shop - I cannot have aluminium chips and coolant spaying all over the place. It must not require compressed air either. Small depths of cut are not an issue, I'm not worried about jobs taking a while. A brushless spindle would be good as I don't want a horrible brushed motor screaming away when the machine is in use.
The Isel ICP 3020 + iSA 500 spindle seem to fulfil my requirements pretty well. At about £6000 though, that set-up doesn't come cheap and is right at the top end of my budget.
There are plenty of small ready built and kit CNC routers available which work out considerably cheaper than the Isel machine. Being a newbie to this kind of stuff, I'm not sure where the price/quality sweet spot is though or whether any one machine stands out from the rest. I'd also consider second-hand kit.
Any advice would be much appreciated. I'd also be interested to hear what experiences, if any, people have had using the ICP 3020 as I'm not able to find any reviews.
Thanks,
Matt.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Desktop size build to learn on - PCB routing / small MDF work.
By dynamis_dk in forum Gantry/Router Machines & BuildingReplies: 10Last Post: 26-02-2014, 11:50 PM -
Suggestions please on a small desktop CNC, lead screws or belt drive?
By Tanky_Turk in forum Linear & Rotary MotionReplies: 10Last Post: 02-02-2014, 03:07 PM -
aluminium profile for cutting bed of router
By steeplejack in forum Marketplace DiscussionReplies: 3Last Post: 19-10-2013, 10:52 PM -
WANTED: CNC Mill/Router for Cutting Aluminium
By kylelnsn in forum Items WantedReplies: 5Last Post: 09-08-2012, 09:54 PM -
Homemade desktop CNC - cutting 0.8mm mild steel out the question?
By HankMcSpank in forum General DiscussionReplies: 7Last Post: 16-04-2010, 09:37 AM
Bookmarks