Threaded View
-
06-01-2014 #1
Hello Folks
My steel arrives tomorrow. . the machine I shall be building will be based on a commercial machine. with a flat top and rails under the sides to keep them hidden and less chance of damage. most of the stone I shall be cutting on the machine have decided will be 2.4 metres long and 1.2 metre wide between 100 and 250mm thick weights various at 300kg to 500kg on the cut, so base will certainly have to be strong enough to hold that with as little deflection as
and of course I shall be keeping a Log.
My question is when do you all start posting logs is it from day 1 and add to it as you go with questions to/ from the members.
or do you build then post the log after building?.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
CONVERSION: my build from the start
By h4ppy-chris in forum Conversion Build LogsReplies: 126Last Post: 03-08-2020, 10:22 PM -
Well here we go again, start another build
By D-man in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 22-01-2014, 09:59 AM -
NEW MEMBER: Hello all, finally ready to start a build log.
By Iwant1 in forum New Member IntroductionsReplies: 11Last Post: 25-12-2012, 06:03 PM -
A few questions before I start my build
By eclassic in forum General DiscussionReplies: 0Last Post: 11-07-2011, 10:54 PM -
NEW MEMBER: New to site
By roymar2 in forum New Member IntroductionsReplies: 1Last Post: 12-12-2010, 03:38 PM
Bookmarks