Chinese 3040T Arrives

**cimi** · 30-01-2014

Originally Posted by EddyCurrent

Looking down on the machine all cutters should turn in the clockwise direction, same direction as a drill would. The up and down spirals are in opposite direction but they both cut in the clockwise direction.
Did you look at the link above to trend-uk.com ?

on that site you sent me .. What can I take to have a complete kit?

**cimi** · 30-01-2014

EddyCurrent yes i see They...on that site you sent me .. What can I take to have a complete kit

**EddyCurrent** · 31-01-2014

I'm not exactly sure what you mean but this site might explain it in your own language;

Mandrini per Pantografo, Utensili Diamante, Frese per Pantografo - CMT Utensili

**cimi** · 31-01-2014

Sì quel sito io ho visto ma non sono sicuro quale utensili andrebbero bene per il mio mandrino ER-11

**cimi** · 31-01-2014

http://youtu.be/EHJ4O-neT-w

**cimi** · 31-01-2014

watch this video if you understand what I'm asking.... if you see tool runs contrary!!

**EddyCurrent** · 31-01-2014

Originally Posted by cimi

Sì quel sito io ho visto ma non sono sicuro quale utensili andrebbero bene per il mio mandrino ER-11

The biggest you can use is a 1/4" shank with the right collet

ER11 Collets - Arc Euro Trade

**EddyCurrent** · 31-01-2014

Originally Posted by cimi

watch this video if you understand what I'm asking.... if you see tool runs contrary!!

Yes I can see the tool runs contrary (anticlockwise) but you don't want that. If you want to use Italian to explain it better I can translate it to English with Google or Babylon.