Quote Originally Posted by Clive S View Post
I have used them several times with no problems ..Clive
Quote Originally Posted by JAZZCNC View Post
Yes I've used them and the wire was ok but a little brittle compared to the stuff I get from CSE cables, thou it is cheaper.
Flexible Control Cable
Thanks for the replies guys, I have placed an order.

Quote Originally Posted by Gregor View Post
I have finally managed to make a simple control plate out off mahogany using Sketchup and then Cambam, with my computers skills very poor it took allot longer than it should have but I got there in the end.
I used an end mill with 2 flutes should I have used an end mill with 3 or 4 flutes ?
Nice work Gregor, it took me ages of experimenting to get something usable out of my machine when I got it, but it's quite satisfying when you do!

Regards,

Les