routercnc_MK3

[routercnc]

All the bits arrived in double quick time. Now I need some help confirming the wiring colours and general connections.

Here is the toroid: 750VA 2x24 from airlink


Here is the power regulator (60,000uF, 100V, 20A rectifier):



Here is a circuit I've drawn up but need help with:
1. Toroid blue and brown I assume are mains input?
2. 4 output wires are from the pair of windings? - but which to connect to the regulator and in which order?
3. I'll mount all this on an aluminium plate which will go to earth - does the centre GND output on the DC side need to be earthed as well?


I'm away from the parts at the moment otherwise I would at least give you the resistance readings across the toroid wires, but hopefully the above is enough.

Thanks