Thread: routercnc_MK3
Threaded View
-
05-04-2014 #8
Hi Eddy,
Thanks for the link -I'd missed some of that thread first time around.
I positioned them with the side engraved '7001 AC' touching each other. That face has the outer race 'peened' over as per SKF-fig2 in the link above. If that is the 'back' then yes they are back-to-back.
Thread Information
Users Browsing this Thread
There are currently 3 users browsing this thread. (0 members and 3 guests)
Bookmarks