. .

Thread: routercnc_MK3

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 17-04-2015 #26
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Well my way is to remove power by dropping out a contactor to transformer and send signal to control informing about e-stop so halting pulses.!

    But in all honest your setup won't be a problem unless you intend traveling at high velocity and have a heavy gantry. So if you have it wired then wouldn't worry.!
    Last edited by JAZZCNC; 17-04-2015 at 05:52 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules