. .

Thread: routercnc_MK3

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 25-05-2015 #20
    HankMcSpank's Avatar
    Lives in London, United Kingdom.
    HankMcSpank
    Last Activity: 10-06-2024 Has been a member for 9-10 years. Has a total post count of 623. Received thanks 10 times, giving thanks to others 59 times.
    I was just about to suggest trying to establish what value the internal R is (on the sensor)....try connecting a 4.7k resistor between your sensor's black wire & your supply voltage ground ...power up the sensor & measure what voltage you have across the 4.7K resistor (it doesn't have to be a 4.7k resistor ...whatever resistor you have to hand!)
    Last edited by HankMcSpank; 25-05-2015 at 05:38 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules