routercnc_MK3

[routercnc]

Hi Clive
Thanks for the comments !

Cable is hard wired (no plug) through the cap onto the motor cables. There is a large cable restraint on top of the end cap which allows a gentle radius on the cable.
I did this after the previous one arced at the plug and blew and killed the VFD.
See post #27 for another picture. I'm away from PC but I posted on it in another thread when my VFD blew

My next machine will have the cable running in energy chains rather than hanging in midair but I need a new longer cable to make that happen.