wadkin ux2lc/c3 with bosh cc100 controller

[george uk]

Cheers, i was thinking the same, its a shame they did not store it inside, and i will have to strip down all the electric to make sure they are dry prior to powering it, everything apart from the drivers and controllers ( spindle, motors, barings, hydro connections and cnccontroller ), has been exposed to the elements for at least a few months.

a upgrade of main parts is looking like 5-6k, and maybe 5 days.

So will decide in morning, its still worth it for the right price

so, will see what deal there is to be done tomorrow afternoon

[JAZZCNC]

a upgrade of main parts is looking like 5-6k, and maybe 5 days.

No maybe to it there will be more than any 5 days to compleltely retrofit, test and setup this thing and if you have no experience then maybe 5 weeks. . .Lol

[george uk]

No maybe to it there will be more than any 5 days to compleltely retrofit, test and setup this thing and if you have no experience then maybe 5 weeks. . .Lol

true, i ment 5 days for swapping over the parts and testing the electrics, testing and setup is another story.

Its a weigh up at the mo over time costs in salvaging/servicing parts, over replacing/fitting them,