Rockcliff Router Build, MDF

[Lee Roberts]

Right onto the next bit:



Ahh the counter-bore, my new best tool! lol

Cheers Steve-m for telling me about these, ill soon be buying some more to compleate the set !

on we go:







for some reson i got it in my head that i would need two plates at each end but i dont so i'v done away with them now, next i needed to make a motor mount from ali again and make a new mdf plate for the ali mount to fix to.

The mdf plate was fine i got that right the first time, however it was getting late and i rushed the ali plates and they dont line up good for the M5 rods and so on so its a bit of hang filling on them, i'm in abit of a rush to get the machine up and running now as its taken far to long due to other things getting in the way/ coming first so i'm not going to keep to the supa fine detail i have done in the past! The new objective is to just get this machine up and running and make parts, as and when ill come back and replace parts with new "cnc'ed" parts that are right the first time. May end up using this machine to build machine number 2 however!



That brings me upto date so far on what i'v done to the machine, i'm hoping now to get this done for the weekend (26/09/08).

I'v got a few other things on the go as well so you'll see them poping up on the forums here and there as well, hopfully ill have some more progress pics and maybe ever some Vid's of the 2 axis's jogging for the end of the week.