Parts need turning

[Robin Hewitt]

I had 3 foot of 1.5" diameter steel rod drilled through and honed to 0.5" a couple of years ago.

I forget who did it but it wasn't expensive, I think they used a gun drill, I used Google

[irving2008]

I had 3 foot of 1.5" diameter steel rod drilled through and honed to 0.5" a couple of years ago.

I forget who did it but it wasn't expensive, I think they used a gun drill, I used Google

Hi Robin, yes it can be done, and I'd not thought of a gun drill but it needs specialist equipment. A gun drill and a lathe with a 1m+ long bed to use it isn't something most people here have access to!

Premier Deep Hole Drilling Limited - The Deep Hole Drilling Process