Hybrid View
-
13-01-2014 #1
Thanks guys loads of ideas to look at here! eddy its a direct drive stepper motor without any drive belts. As for the photo and it correcting itself. I think it did the top text line in a different order I.e do a few letters and go do something else then come back. I haven't corrected anything in any of the pics.. hope that helps?
I think it is most likely a mechanical issue as is suggested. so I'm going to take a few videos while its cutting to see if I can narrow it down further.
@ Jonathan I think you are correct about it having jumped different amounts, it looks like that to me too. I will run the code tonight when I get in from work. thank you!
@ washout and jazz cheers guys I will look into your suggestions after I can nail this this down on video.
and Geoffrey I shall indeed try changing those settings as it does look like its only doing this whilst moving fast and not actually cutting. cheers guys I will report back. hope I haven't missed anyone out trying to type this from my mobile!
cheers andy
Thread Information
Users Browsing this Thread
There are currently 5 users browsing this thread. (0 members and 5 guests)
Similar Threads
-
Workshop & Noise Help
By kemo_2002 in forum Workshop & EquipmentReplies: 7Last Post: 12-04-2014, 10:16 PM -
Dell monitor making a funny noise !
By Lee Roberts in forum MonitorsReplies: 1Last Post: 13-09-2013, 12:11 PM -
MDF CNC Router plans / parts for home build beginners
By HiltonSteve in forum Gantry/Router Machines & BuildingReplies: 81Last Post: 10-06-2012, 02:33 PM -
Homepage occasionally displays incorrectly.
By Jonathan in forum General DiscussionReplies: 1Last Post: 08-06-2012, 09:15 AM -
Motor noise
By M250cnc in forum General ElectronicsReplies: 4Last Post: 25-11-2010, 02:06 PM
Bookmarks