. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 15-01-2014 #1
    Jonathan's Avatar
    Lives in Leicester (Home) or Nottingham University (2nd Home), United Kingdom.
    Jonathan
    Last Activity: 05-04-2020 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 3,571. Received thanks 325 times, giving thanks to others 8 times. Referred 1 members to the community.
    1.5KW WATER COOLED SPINDLE MOTOR ER16 & VFD DRIVE INVERTER 80mm Diameter | eBay

    Quote Originally Posted by charlieuk View Post
    has any one had one from the Portsmouth supplier are they actually the same thing? the pictures all seam to vary and there is no mention of if its 3 or 4 bearings. I was going to get one from cnc4u but they are out of stock for 8 weeks till there next shipment.
    Apparently all these spindles come from one of two factories. I wouldn't worry about the pictures.. just pick one. If you're application warranted getting a better quality spindle, then I'd suggest a specific one from www.aliexpress.com (which would cost quite a lot more), but for cutting foam / wood any of them will be fine.

    Quote Originally Posted by routercnc View Post
    Typo through speed typing?! My 1.5kW water cooled spindle came with an ER11, not ER16, which is max ~7mm or 1/4" collets
    1.5kW spindles are available with ER16, but you're right - I meant to say ER11.

    This thread is rapidly becoming a duplicate of this one, mainly due to me admittedly.
    Last edited by Jonathan; 15-01-2014 at 10:28 PM.
    Old router build log here. New router build log here. Lathe build log here.
    Electric motorbike project here.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Chinese 300W DC spindle - is the spindle shaft grounded?
    By HankMcSpank in forum Spindles & Drive Motors
    Replies: 44
    Last Post: 26-11-2016, 07:25 PM
  2. Help choosing a cnc lathe
    By Hellfire in forum Marketplace Discussion
    Replies: 11
    Last Post: 10-04-2016, 02:07 PM
  3. CNC Spindle Repair and Spindle Replacement for any Machine of any Manufacturer
    By spindeldoctor in forum Manufacturer News
    Replies: 0
    Last Post: 13-11-2013, 07:50 PM
  4. Choosing parts for a mill conversion
    By thommy in forum Milling Machines, Builds & Conversions
    Replies: 2
    Last Post: 21-09-2013, 05:52 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules