-
15-01-2014 #1
I want to retrofit an old semi big lathe 1.6m distance between centers.
So i got 2 servos 1.8kw 3000rpm 6Nm.
I must choose between pulleys/timing belts or shaft coupler (ballscrew-motor)
(I have already ordered X axis ballscrew+ballnut 1605 L700mm + single ballnut)
Because i have not experience for this construction
i want to ask what will be better for Z/X axis ballscrew diameter/pitch single or double nut and what will be better ballscrew-motor coupler or transmision with timming belts and pulleys.
The lathe now has leadscrew diameter 30mm pitch 4TPI (~6.35mm) and has prismatic ways for Z axis and dovetail ways for X axis.
Any suggestions that will help me iam looking for a good combination?Last edited by vre; 15-01-2014 at 08:05 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Belts & pulleys,
By jcb121 in forum Belt Drive, Pulleys & TimingReplies: 4Last Post: 29-09-2012, 12:32 AM -
pulleys and belts - sizes
By mocha in forum Belt Drive, Pulleys & TimingReplies: 3Last Post: 22-07-2012, 05:16 PM -
Advice: Timing Pulleys and Belts
By Mad Professor in forum Belt Drive, Pulleys & TimingReplies: 7Last Post: 24-06-2012, 12:30 PM -
Belts & pulleys & advice please
By CNCBlug in forum Belt Drive, Pulleys & TimingReplies: 12Last Post: 29-04-2012, 10:31 PM -
Source for XL timing belts and pulleys
By MikeyC38 in forum Gantry/Router Machines & BuildingReplies: 4Last Post: 20-08-2009, 01:21 PM
Bookmarks