. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 16-01-2014 #2
    EddyCurrent's Avatar
    Lives in West Cumbria, United Kingdom.
    EddyCurrent
    Last Activity: 02-10-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,197. Received thanks 276 times, giving thanks to others 110 times. Is a beta tester for Machinists Network features.
    Maybe someone else can confirm that if you swap out the DSP interface board for a standard breakout board + spindle board, that will allow you to use Mach3. Personally I would definitely want to go with Mach3 or Linux rather than the DSP.
    Post some photos looking inside the control box so all the boards etc. can be seen.
    Last edited by EddyCurrent; 16-01-2014 at 08:57 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. DeskProto 3D cam software, forum support added!
    By Lee Roberts in forum DeskProto
    Replies: 0
    Last Post: 27-01-2014, 03:21 PM
  2. what is post processing? Deskproto software, ambition of making 3d reliefs
    By chris in forum DeskProto
    Replies: 7
    Last Post: 20-01-2014, 08:55 PM
  3. Newbie. Questions about design software and machine control software
    By MTech in forum Computer Software
    Replies: 2
    Last Post: 11-12-2012, 12:58 PM
  4. HME Technology router NEE AMC-E controller WinAMC software
    By artmin in forum Motor Drivers & Controllers
    Replies: 39
    Last Post: 24-01-2012, 11:29 PM
  5. NEW MEMBER: Newby with Software questions
    By soupsy in forum New Member Introductions
    Replies: 3
    Last Post: 18-03-2011, 12:19 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules