GEC Gemini spindle drive from Boxford 260 VMC

[Roboteernat]

Tank you Mike, I will try a look to see if I can find this document.
this afternoon I took apart the yaskawa contactor and realised how it operates and is connected, so hopefully the diagram will confirm this. I believe it uses the relays on the Oxford relay card in the rack to switch the inputs to live on the opposing feed. I have therefore wired the live inputs for both sides through the relays on the spindle controller board, therefore if I am correct, the spindle poles will change over depending on the relay operations through mach3.

i was hoping to get some nice pics of the board components today but I left my camera at home, and there were no spare cameras at work which was extremely surprising considering I work at aardman animations, where cameras are everywhere! Anyway, I will post some pics of the board tomorrow as will bring my camera in.
if you could email me he diagram if you have a spare moment, although I'm going to try and find the group, that would be appreciated.

my email is

npoate @ hot mail dotty com

thanks

nat