Hi guys,

I have decided to go ahead and convert my KRV2000 to CNC. No mater how much I would live to just get the ballscrews from XYZ ltd to avoid having to faff about with drawings etc, I am also looking to do the job on a reasonable budget.

To this end, if anyone that has a XYZ 2000 type cnc machine, could tell me the ball screw diameters, it would be most helpfull.

My initial googling came up with 32mm but the 32mm nut does not seem to fit inside the x-y yoke. So I am thinking it may be a 25mm screw.

Thanks in advance


George