. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 22-01-2014 #1
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Quote Originally Posted by cropwell View Post
    I have been considering a rebuild of my MD machine and I have been musing on how to counter various problems.
    Rob don't bother mate just sell it complete and start again.!! . . . . I've been down this road with Micheal marino who was doing the same and he'll agree with me you'll just be wasting your money.
    For very little more money you'll build a far far better machine than an upgraded MD could ever hope to be.!!. . . . . You can't turn a Sow's ear into Silk purse no matter how hard you try.!!

    Bit of advise is don't order anything until you have a finalised design and direction to head in.!
    Reply With Quote Reply With Quote
  2. 22-01-2014 #2
    GEOFFREY's Avatar
    Lives in bourne, United Kingdom.
    GEOFFREY
    Last Activity: 1 Week Ago Has been a member for 9-10 years. Has a total post count of 769. Received thanks 48 times, giving thanks to others 55 times.
    Listen to Jazz's advice or you may be taking wrong steps in the wrong direction!!! Good luck with whatever you decide. G.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Interesting Papers on heavy duty design, vibrations, composites and column design
    By D.C. in forum Gantry/Router Machines & Building
    Replies: 15
    Last Post: 25-06-2016, 10:13 PM
  2. A couple of general design questions - ball-screw thread length, stub-shaft etc.
    By Wal in forum Gantry/Router Machines & Building
    Replies: 4
    Last Post: 02-01-2015, 08:32 AM
  3. Newbie. Questions about design software and machine control software
    By MTech in forum Computer Software
    Replies: 2
    Last Post: 11-12-2012, 12:58 PM
  4. Design help etc required with DIY CNC Router Design / Build
    By MikeyC38 in forum Gantry/Router Machines & Building
    Replies: 12
    Last Post: 21-10-2011, 04:50 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules