-
26-01-2014 #21
-
26-01-2014 #22
-
07-02-2014 #23
So I have finally got round to taking my spindle apart to check the bearings and I am a bit stuck...
All has come apart fine except for the black part that connect to the main silver body. I have removed the screws but it will not budge
Any ideas?
(I will try and post some pics tonight)
JimLast edited by cncJim; 07-02-2014 at 10:42 AM.
-
07-02-2014 #24
That's the bit the water hoses and connector go into? If so then it will come off after removing the screws, however they can just be tight. If there's any gap between the black part and the water jacket you may be able to carefully tap a flat screwdriver in and pry it off. If that doesn't work you'll have to try something more imaginative, possibly involving a hammer...
Watch out for the O-rings beneath the coolant hose barbs - you don't want to loose them.
-
07-02-2014 #25
-
07-02-2014 #26
-
The Following User Says Thank You to Jonathan For This Useful Post:
-
07-02-2014 #27
ahh ok - I will give that a try tonight, cheers!
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Garage CNC - A gantry style machine design
By fandango in forum Gantry/Router Machines & BuildingReplies: 14Last Post: 21-03-2014, 01:38 AM -
shed/garage electronics,
By jcb121 in forum General ElectronicsReplies: 12Last Post: 29-07-2013, 10:52 AM -
My garage
By wilfy in forum Workshop & EquipmentReplies: 55Last Post: 18-02-2013, 06:40 PM
Bookmarks