Thread: UIM2901-5A Mach 3 BOB wiring
Threaded View
-
29-01-2014 #2
Last Activity: 29-06-2025
Just into AG and p13 like the diagram on page 4, same for home switches. The home switches can be wired in series and Mach3 will take care of it or if you like, though it's a waste of inputs, each switch can have it's own input. If you are using two motors for one axis, i.e. one is a slave, then it's a good idea to have another home switch for it but it will need it's own input. This is so the gantry can be 'squared' at the home position.
Last edited by EddyCurrent; 29-01-2014 at 02:52 PM.
-
The Following User Says Thank You to EddyCurrent For This Useful Post:
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
eBay: UIM2901-5A Mach3 breakout board with spindle speed control
By Fivetide in forum Items On eBay UKReplies: 0Last Post: 05-02-2013, 07:25 PM -
UIM2901-5A MACH3 Experiences
By 200thhorseman in forum Gantry/Router Machines & BuildingReplies: 4Last Post: 09-07-2012, 01:40 PM -
cnc wiring
By crossleymarko in forum Gantry/Router Machines & BuildingReplies: 1Last Post: 09-04-2012, 09:35 PM -
help me for wiring
By ali hedi in forum General ElectronicsReplies: 0Last Post: 28-11-2010, 01:20 PM -
Wiring Help
By Toddy in forum Motor Drivers & ControllersReplies: 8Last Post: 23-11-2010, 01:48 PM
Bookmarks