-
30-01-2014 #11
FIXED!
There was a little post i found on a google search.
There is a tick box - "Max CL Mode Enabled", this was checked, unchecking solved the issue :)
Happy days, thanks for the help.
-
30-01-2014 #12
Good to hear you've got it working.
- NickLast edited by magicniner; 30-01-2014 at 10:09 AM.
-
30-01-2014 #13
Check the LPT port in the computer Bios. Make sure it is enabled and set to bi-directional if that setting is available, else use ECP or EPP.
-
30-01-2014 #14
Yes, the port is set as Ecp/Epp in bios.
all working now.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
tree problems!
By kingcreaky in forum Woodwork DiscussionReplies: 8Last Post: 02-06-2014, 12:35 PM -
F-Engrave problems
By cropwell in forum CAD & CAM SoftwareReplies: 29Last Post: 29-06-2013, 03:48 PM -
problems since update
By motoxy in forum General DiscussionReplies: 6Last Post: 02-11-2012, 06:14 PM -
NEW MEMBER: MDF Problems
By MrWiz73 in forum New Member IntroductionsReplies: 4Last Post: 31-12-2011, 12:39 AM -
homing problems in mach3
By johngoodrich in forum Artsoft Mach (3 & 4)Replies: 2Last Post: 17-09-2011, 08:28 PM
Bookmarks