. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 03-02-2014 #31
    EddyCurrent's Avatar
    Lives in West Cumbria, United Kingdom.
    EddyCurrent
    Last Activity: 02-10-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,197. Received thanks 276 times, giving thanks to others 110 times. Is a beta tester for Machinists Network features.
    ABB ACS355 2.2kW 230V 1ph to 3ph - Vector Control AC Inverter Drive Speed Controller - AC Inverter Drives (230V)
    ABB ACS-CP-C Basic Control Panel (Keypad) for ACS310, ACS350, ACS355 and ACS550 Inverters (+J404) - Accessories for AC Drives

    There's vector torque mode and vector speed mode, you can download the manual from above web site.
    Should give full load torque at zero speed.

    Be aware though it didn't work right out of the box, see here http://www.mycncuk.com/forums/gantry...html#post54303

    I have two of these, the other drives a standard 2.2kW 3000 rpm motor in vector mode and this does work out of the box.

    This is a great read too.
    http://http://www05.abb.com/global/scot/scot201.nsf/veritydisplay/771cd1d59737abfac1257b0f0046ac22/$file/TechnicalGuideBook_EN_3AFE64514482_RevG.pdf
    Last edited by EddyCurrent; 03-02-2014 at 10:41 PM.
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to EddyCurrent For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Build Log: Servo Drive and VFD with vector control
    By Jonathan in forum Electronic Project Building
    Replies: 17
    Last Post: 05-04-2015, 07:58 PM
  2. Need help with a sensorless vector VFD and 2.2kw motor.
    By kajuk in forum Spindles & Drive Motors
    Replies: 0
    Last Post: 29-01-2014, 06:09 PM
  3. Vector Linker , thermic cutting
    By CNCtoolsWorld in forum Manufacturer News
    Replies: 0
    Last Post: 28-02-2013, 04:55 PM
  4. bitmap to vector conversion
    By GEOFFREY in forum Computer Software
    Replies: 16
    Last Post: 29-12-2012, 06:32 PM
  5. Vector graphics AKA CAD for free
    By m.marino in forum Computer Software
    Replies: 1
    Last Post: 15-01-2009, 02:17 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules