. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 03-02-2014 #1
    Tenson's Avatar
    Lives in London, United Kingdom.
    Tenson
    Last Activity: 29-06-2021 Has been a member for 9-10 years. Has a total post count of 555. Received thanks 29 times, giving thanks to others 9 times.
    I've got 4Nm motors on all axis.

    Difficult to say about speed exactly. I was using a max of 7m/min mostly just doing rapids. I found there were sometimes missing steps and position was slightly lost. I dropped that down to 5m/min and it worked better. Still I don't cut faster than 4m/min or things like sharp corners become rounded.

    What are the differences between DQ860MA and CW8060? They looks about identical.
    Last edited by Tenson; 03-02-2014 at 07:57 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Heidenhain ME 101 Tape reader or alternative program storage.
    By corkcnc in forum Machine Control Software
    Replies: 3
    Last Post: 19-03-2014, 11:28 AM
  2. Alternative slides and guides
    By Swarfing in forum Rails, Guideways & Bearings
    Replies: 14
    Last Post: 23-04-2012, 07:14 PM
  3. AutoEditNC alternative?
    By DanielF in forum Programmers Corner
    Replies: 12
    Last Post: 22-02-2012, 12:46 PM
  4. Cheap Sign Foam Alternative
    By action-kat in forum Machine Discussion
    Replies: 5
    Last Post: 20-09-2011, 12:35 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules