CNC machine "Spanish" model . Advice and opinions needed!

[JAZZCNC]

Forget the books all you need is here on the forum.

If you can use CAD and have access to welder, drill press and few basic power tools grinder etc and can weld to a basic level then you'll easily build a CNC machine which if done correctly will more than match anything you'll buy costing double or triple what you'll invest building your own.

Best advise is do the research and read the forum untill your confident you know enough to start building. Then come up with a design that will suit you, don't be afraid to copy someone else's design either as there's only so many ways to build these things.!!
Then draw the basic design up in Cad to check component fits etc but don't get too carried away with full blown fancy Cad models has the build always changes from the Cad model in some way or another. So just basic CAD and then get on with building machine.

BUT before building phase Start a build thread and run it by us for checking.

DONT buy anything until your absolutley sure it's correct for your needs and again run it by forum to verify your correct. Don't be afraid of the electronics, Motors, drives etc they are very simple things to get working but whats Very important is they are sized correctly and why your best running all the components your intending to use by us first so we can check they are balanced correctly and suitable for your needs.
If your unsure then just ask and no question is a dumb question so don't be afraid to ask anything your unsure about.

Happy building.!