Hybrid View
-
06-02-2014 #1
Like Geoffrey says the construction is a little light weight. It reminds me of a sign writing machine rather than a machine capable of cutting plywood or mdf at any speed at all.
Positives are it appears to have everything you need to get started, tools, vcarve and extraction. Just missing a vacuum bed.CNC routing and prototyping services www.cncscotland.co.uk
ADD ME ON FACEBOOKS
-
06-02-2014 #2
Last edited by shapebusters; 06-02-2014 at 09:17 PM.
-
06-02-2014 #3
My concern about the table is that it appears to have no diagonal bracing, and the gantry appears to be a fairly light guage steel pressing. My comment about multi-user was because I thought the "coworker- hackspace" usage would imply several users. The reason that I said more than one machine shown was a) different colour spindles and b) different legs. I think most of the chinese machines use chinese spindles(it could of course been imported into Spain without a spindle) and that does not look like a typical chinese spindle to me. (Kress?). G.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Help on a couple of "niggles" with my machine.
By Washout in forum Machine DiscussionReplies: 4Last Post: 24-04-2014, 12:30 AM -
Now that's what ya call a "BIG" CNC machine.!!
By JAZZCNC in forum General DiscussionReplies: 7Last Post: 08-04-2014, 11:25 PM -
BUILD LOG: My baby 15" x 15" machine
By wilfy in forum DIY Router Build LogsReplies: 129Last Post: 19-03-2013, 09:16 PM -
"Racks" VS "ball screw"
By C.AlveSilva in forum Linear & Rotary MotionReplies: 1Last Post: 17-04-2012, 11:53 PM -
Calibrating my new machine - "never the same twice" woes
By HankMcSpank in forum General DiscussionReplies: 4Last Post: 23-11-2011, 05:54 PM
Bookmarks