Create dxf file.

[Tanky_Turk]

Thanks mate, that did the trick.

I made a new psd file and separated the "graphics" and "text" in two different layers. I then opened the psd file and traced each part indivudually as you suggested. The "graphic" trace looks (almost) perfect now, just got to play around with the other setting to see if I can get a better trace.

The only other problem I have now is that the dxf file is massive, about 38MB, takes ages to open and work on in CAMBAM.

Is there any way to make it smaller without losing quality?

Thanks for your help.

Eric

To avoid the double lines in Illustrator, in Tracing Options : turn off fills, turn on strokes and change 'max stroke weight' to 100px.

You will probably have to combine this output with the text you traced using the default settings.

HTH,
Si.