Thread: help with servo motors Please.
Threaded View
-
10-02-2014 #1
Once upon a time I thought I had the drive system worked out.i had intended Using stepper Motors.
Then one of my friends said why not use servos you can get a faster working speed.
machine bed is 2635mm long and 1220 wide.
so after some calculations came up with two 400 watt to position the R&P x
one to position the Y and one to position the Z. which is above the calculations of 2 x 230 watt for the X
I wish to run the machine faster than 7.2 metres per minute.
Ive looked at loads of profi Machines they are R&P 90% run on steppers. Usually somewhere about 12NM.
After endless searching on the NET for suppliers in the UK I am finding the choice very difficult and of course,
Know very little about servo Drives.
Could someone explain what a multiaxis drive is and can I use one to drive 4 motors on 3 axis.
and are there any other suppliers in the UK that sell larger servo motors than Remote control Aeroplanes.
the only one ive come across is ZAPP
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Replacing Servo motors
By m_c in forum Motor Drivers & ControllersReplies: 15Last Post: 28-04-2013, 12:02 AM -
FOR SALE: 400w panasonic ac brushless servo motors and drives
By gavztheouch in forum Items For SaleReplies: 3Last Post: 29-12-2011, 03:04 PM -
servo as a spindle
By Swarfing in forum Stepper & Servo MotorsReplies: 2Last Post: 27-10-2010, 12:30 AM -
Dc Servo Motors On Ebay
By audioandy in forum General DiscussionReplies: 0Last Post: 26-08-2010, 10:36 PM -
re servo encoder
By Scott in forum General ElectronicsReplies: 6Last Post: 24-06-2010, 08:30 AM
Bookmarks