Quote Originally Posted by JAZZCNC View Post
Excellent Charlie, Pleased could help and Nice to finally see it come alive, It's great feeling isn't it. .

Regards the Noisey stepper then if it's one that's connected to the EM806 drives then chances are you just need to tweak the tuning in software. Could just be slightly off and now they are on the machine the resonance is different so auto config set the PID tuning to match being off the machine so re-tune thru the software and it will be fine i'm sure. . . . .. (Anyone wondering what I'm on about I'm replying here to an email Charlie sent me.!)
yes im over the moon its turned from a pile of expensive bits into almost a working machine!

yes it is one of the ones on the 806 drivers. we did swap the cables over between the two 806's and the buzz swapped motors as well. i have the lead now so we will try will take a look at retuning tomorrow.

Many thanks again for all your help.

Charlie