. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 18-02-2014 #1
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    You will almost certainly need shielded cables on the Steppers and any other Signal cable and make sure your using star grounding.

    I have a test setup for testing machines and the minute My Tig with HF pulse fires the PC freaks out, doesn't crash but it stalls n stutters and no way could it run a CNC machine at same time. I'm pretty sure that's HF going done the mains line and a decent filter would help but still shows how HF Pulse can and will affect the machine.!!
    Last edited by JAZZCNC; 18-02-2014 at 11:04 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. where to start
    By martin54 in forum Gantry/Router Machines & Building
    Replies: 16
    Last Post: 22-09-2012, 11:29 AM
  2. where to start?
    By trounce in forum Gantry/Router Machines & Building
    Replies: 44
    Last Post: 03-10-2011, 02:03 PM
  3. is this 2.5d where do i start? help please if you can
    By h4ppy-chris in forum General Discussion
    Replies: 4
    Last Post: 29-03-2011, 12:21 PM
  4. Plasma - Big Problems - HF Start !!!
    By jamied in forum Machine Discussion
    Replies: 10
    Last Post: 22-09-2010, 12:27 AM
  5. Where to start?
    By ricey3 in forum Computer Software
    Replies: 10
    Last Post: 25-10-2009, 08:01 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules