-
20-02-2014 #1
In an effort to squeeze it all into the minimal space
in a nice box £27 wortyh with vents and that, Its all a bit too cramped?
i robbed the power socket from a printer, it had little magnets on it - do I leave these on or remove them?Last edited by nobby; 20-02-2014 at 10:24 PM.
-
20-02-2014 #2
also
the power in to the main switch, do I just switch the live, or the neutral too?
-
21-02-2014 #3
I hope you didnt use the hammer to get it all in
. I would say its way too cramped. The pcb is mounted above the vents for the psu. You really dont want to obstruct the cooling system. I would have gone for something about twice that size.
Are you sure the little magnets are not ferrite beads? If they are leave them there. Switching both live conductors is a good idea. I would recommend you do it.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks