symmetrical hart shape in vectric v carve pro

[GEOFFREY]

I have posted here a couple of times asking if any is aware a good quality raster to vector converter, but have cometo the conclusion that there probably isn't one!!! I usually end up photo-copying the image as large as possible onto a piece of "clear" tracing paper (or some printable acetate that my wife uses) selotaping that onto the screen and using the line tool just keep clicking every couple of mm round the image (yes symmetrical sections get mirrored). I then convert the lines to splines, edit the splines to get the shape I want and then covet the splines back to lines (I can't put cutter paths on splines). G.