. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 02-03-2014 #4
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Quote Originally Posted by Danielroyal25 View Post
    This is why I'm so confused by it. All the settings are identical on every drive and tried several times with new fuses and they have all blown. I can't see how the other 3 drives are fine but this one isn't. Will see i I have a slightly higher rated fuse and give it a go.
    No don't go higher on the fuse else you risk damage. I'm currently setting up a machine with AM882 and running 1A fuse for safety while testing without blowing fuses so you have a problem some where Dan.

    Go over all the wiring again and check connections. You will have a problem somewhere that isn't obvious.
    I've built many control boxs now and still I get problems and just today I've spent 5 hours chasing an issue that turned out to be a simple 0v wire in wrong place so it will be something daft like this. Go over every thing with a fine tooth comb.

    DONT UP RATE FUSES Whatever you do.
    Last edited by JAZZCNC; 02-03-2014 at 12:53 PM. Reason: To correct my bad habbit's
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Leadshine website and AM882
    By EddyCurrent in forum General Electronics
    Replies: 12
    Last Post: 24-08-2018, 01:59 AM
  2. I NeeD HeLp PLease AM882 a good choise
    By jpsicilia in forum Motor Drivers & Controllers
    Replies: 34
    Last Post: 16-08-2014, 10:27 PM
  3. Problem with AM882 drivers !..... or it could just be me !
    By Buba b in forum Motor Drivers & Controllers
    Replies: 10
    Last Post: 03-04-2013, 09:28 AM
  4. 3 axis driver...Fuses keep blowing
    By dudz in forum Motor Drivers & Controllers
    Replies: 5
    Last Post: 28-01-2013, 08:05 PM
  5. Fuse Size
    By manofgresley in forum Motor Drivers & Controllers
    Replies: 1
    Last Post: 14-09-2012, 05:54 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules