Hybrid View
-
06-09-2014 #1
the simplest solution blasocut 2000 if you cant stretch to hangsterfers 787 in many many years of machining stuff you will find there are toytown coolants and two that aren't
-
The Following User Says Thank You to compositepro For This Useful Post:
-
07-09-2014 #2
I'm always happy with Hysol excel although I'm not sure if you can get it in hobbiest size. I have a 20kg drum that's lasted me for a couple of years but I use mist on Alu as it's just neater for my set up. If I'm on stainless I put the enclosure around the machine and go with the flood. A buddy of mine uses it in full flood all the time in his full enclosed machine and is happy with it. Doesn't stink too much and when you use it at about 5% in the emusion once the water evaporates off it leaves a nice protective coating of oil on the table and slideways. Handy if you are only using the machine a couple of times a week.
Just my two cents.
Noel.
-
08-09-2014 #3
Hi corkcnc
Thank you for the info and your thoughts. I will have a look at what coolant I can get. It is good to know what your using and how your using it.
Many thanks for your time.
Suesi
-
08-09-2014 #4
Hi compositepro,
I still have not got around to getting coolant as I am still trying to learn how to use my CNC! I will look into the coolant you suggest.
Many thanks
Suesi
Thread Information
Users Browsing this Thread
There are currently 5 users browsing this thread. (0 members and 5 guests)
Similar Threads
-
Canola oil as a coolant ?
By cropwell in forum Swarf & Chip ManagementReplies: 9Last Post: 17-10-2015, 03:31 PM -
My Coolant System
By Tenson in forum Swarf & Chip ManagementReplies: 6Last Post: 08-04-2013, 01:59 PM -
coolant
By luke11cnc in forum Machine DiscussionReplies: 4Last Post: 11-02-2012, 01:17 PM -
What coolant to use??
By don_jarr in forum General DiscussionReplies: 13Last Post: 05-11-2011, 03:12 PM -
eBay: Castrol Cooledge Cutting Coolant Suds
By Lee Roberts in forum Items On eBay UKReplies: 3Last Post: 09-08-2009, 09:42 PM
Bookmarks