Thread: Hi, from sunny Manchester...
-
02-03-2014 #1
Just (finally) got my micro CNC router up and useful. It's a used Zen 7x7, as per their spec.
I've had a big learning curve, as even though I've got a lot of commercial/manufacturing experience with CNC, a 400 tonne machine is just a bit different...
I've found that although Mach 3 is great value software, it's big. Bloody big (to learn/configure), but now, 'alle ist gut'
To the extent that I have just finished putting holes into some ally arms for my quad. It was great just to zero everything up, clamp the section down, and drill accurately, whilst consuming a quick tab!
Having trouble figuring out the relay switch on my PRC driver board (TB6560 blue 3-axis), it might have blown...
If anyone is playing in Manchester, or wants help, feel free to PM me.
Cheers, all, TTFN.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
NEW MEMBER: Hey from manchester
By craigrobbo in forum New Member IntroductionsReplies: 1Last Post: 01-05-2012, 06:38 PM -
NEW MEMBER: Hello from Manchester
By Pro Mod in forum New Member IntroductionsReplies: 3Last Post: 01-05-2012, 06:33 PM -
NEW MEMBER: Hello from Manchester!
By Dopy in forum New Member IntroductionsReplies: 1Last Post: 19-10-2010, 01:24 AM -
NEW MEMBER: Hello from Manchester
By electricwizard in forum New Member IntroductionsReplies: 4Last Post: 26-08-2010, 02:08 PM -
NEW MEMBER: Hi from Manchester (ish)
By the_mole_763682 in forum New Member IntroductionsReplies: 2Last Post: 11-06-2010, 12:39 AM
Bookmarks