. .
  1. 03-03-2014 #1
    dudz's Avatar
    Lives in Dunedin, New Zealand.
    dudz
    Last Activity: 09-02-2025 Has a total post count of 295. Received thanks 2 times, giving thanks to others 79 times.
    Building my new Y and Z axis with 1605 ballscrews and SBR20 supported rails.

    The ballnuts I have are 5mm short from center to top. I need 2 made this week please.
    Attached Thumbnails Attached Thumbnails Click image for larger version.  Name: housing1.bmp  Views: 323  Size: 1.38 MB  ID: 11741  
    Last edited by dudz; 05-03-2014 at 09:00 AM.
    Swedish Storbro Luna - 3 axis CNC mIll - 250 - 2500rpm / 1.1 tonne

    3 axis CNC/router / Alu profile frame....25mm Alu Cutting bed X=500mm Y=300mm Z=110mm.....Supported 25mm X rails ....Supported 20mm Y rails....Supported 20mm Z rails.....2.2kw Chinese WC spindle..... CSLAB CSMIO/IP-M 4-axis Ethernet Motion Controller....M542 Drivers..SY60STH86-3008BF Motors...running....Mach3 / Cambam / Emachineshop.
    Reply With Quote Reply With Quote
  2. 05-03-2014 #2
    dudz's Avatar
    Lives in Dunedin, New Zealand.
    dudz
    Last Activity: 09-02-2025 Has a total post count of 295. Received thanks 2 times, giving thanks to others 79 times.
    Decided to use 5mm aluminium pieces to pack it out. Parts no longer required

    Thanks
    Swedish Storbro Luna - 3 axis CNC mIll - 250 - 2500rpm / 1.1 tonne

    3 axis CNC/router / Alu profile frame....25mm Alu Cutting bed X=500mm Y=300mm Z=110mm.....Supported 25mm X rails ....Supported 20mm Y rails....Supported 20mm Z rails.....2.2kw Chinese WC spindle..... CSLAB CSMIO/IP-M 4-axis Ethernet Motion Controller....M542 Drivers..SY60STH86-3008BF Motors...running....Mach3 / Cambam / Emachineshop.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WANTED: Ballnut Bracket needed please
    By EddyCurrent in forum Items Wanted
    Replies: 3
    Last Post: 24-02-2014, 11:15 AM
  2. Any backlash setting needed for ballnut endowed machine?
    By HankMcSpank in forum Lead Screws, Nuts & Supports
    Replies: 1
    Last Post: 14-09-2013, 12:00 AM
  3. RFQ: Nema 23 motor mounts
    By luke11cnc in forum Projects, Jobs & Requests
    Replies: 14
    Last Post: 06-10-2011, 02:21 PM
  4. Mounts; Motors, bearings etc..
    By mocha in forum Gantry/Router Machines & Building
    Replies: 19
    Last Post: 29-09-2011, 10:20 AM
  5. DIY Nema23 Motor Mounts
    By Lee Roberts in forum Gantry/Router Machines & Building
    Replies: 5
    Last Post: 23-08-2009, 06:08 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules