. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 06-03-2014 #1
    EddyCurrent's Avatar
    Lives in West Cumbria, United Kingdom.
    EddyCurrent
    Last Activity: 18-12-2023 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,197. Received thanks 276 times, giving thanks to others 110 times. Is a beta tester for Machinists Network features.
    The best and cheapest way to, "work out all the sizes", is to use Sketchup (or Solidworks if you have it) then you can go right to the metal. If you've had a good read on this forum you will see that it's supported or profile rail all round and ball screws. Obviously there are MDF machines with all sorts of arrangements out there and they seem to work but also they are inaccurate, slow, and can't cut much of anything with a decent depth of cut.
    Personally I don't have time to waste and neither should anyone else so just go for the right stuff from the outset.
    Oh and welcome to the forum.
    Last edited by EddyCurrent; 06-03-2014 at 10:31 PM.
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. BUILD LOG: New Build - For Your Amusement - MK-2 build
    By Karl in forum DIY Router Build Logs
    Replies: 12
    Last Post: 08-02-2017, 08:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules